Category description
There may be times when you receive and error message when using the mobile app. These message are to advise you that something went wrong with what you were doing. Below is a list of error messages you will see and what they mean: The above message is advising you that you have entered your user name [...]
The following video demonstrates the proper way to clean and disinfect your Zebra mobile computers and scanners.
In order to have a successful Sync and avoid Sync errors, please ensure the following steps are taken during the sync process: Make sure your device has a strong wi-fi or LAN signal prior to syncing - you should have at least 2 bars of signal for a successful sync. Stay in the same location that has the strong signal [...]
If you encounter a fire extinguisher or other moveable equipment with an unknown location you can use the equipment lookup feature to display the equipment's current systematic location. From any screen, open the menu in the top, right corner of the screen and select Settings. On the Settings screen, click on Moveable Equipment Lookup. The camera [...]
When a checkpoint has an open discrepancy it is visible on the Location Details or Equipment Details screen. Discrepancies are only visible when they are open, closed discrepancies cannot be viewed on the mobile device. When open discrepancies are present they are displayed right below tasks on the Equipment Details screen and right below questions on the Location Details screen. The dashboard display shows the [...]
InspectNTrack is often setup to create discrepancies automatically when an inspection fails. Discrepancies can also be created manually as needed. Discrepancies can only be manually created on the Location Details or Equipment Details screen. The new discrepancy will be associated to the location or equipment that was being viewed at the time the discrepancy was created. To create a discrepancy complete [...]
The following video describes how to change a barcode ID from the mobile app. You can change the barcode ID of a location, fixed equipment, or moveable equipment from the mobile app. This is permissions based. First, navigate to through the proper route and zone to arrive at the details screen of the checkpoint you wish [...]
If you have permissions you may edit the last done date of any inspection from the mobile device. First, navigate to the Equipment Details screen of a fixed or moveable equipment. You will see a list of the tasks associated with the equipment. Tap the "i" icon on the right side of the task you wish to edit [...]
In order to add a new moveable equipment you must first add a new location and be on the Location Details screen. Or, you may navigate into an existing location and be on the Location Details screen of the mobile app. Tap on the menu in the upper, right corner of the screen and select Add New Moveable Equipment. The moveable [...]
Adding a location In order to add a new location you must be on the Location screen of the mobile app. Tap on the menu in the upper, right corner of the screen and select Add New Location. The location will be assigned to the zone that the user is currently navigated into. Complete the fields as follows: 1. Location ID - Tap [...]
Fire and life safety inspection software brought to you by Wentworth Enterprise Inspection Software
1265 Ridge Road
©2023 Wentworth Solutions | Sitemap